Bug Reports

If I have edit access to the project/part, then I can't open the Inspect section. Makes it impossible to add a new part, edit properties, etc https://www.loom.com/share/33c92bce05d94875a978421c76838a79

Switching to an alternate flux/chat panel results in panel loading, crashing, then blanking out. no controls, text, or chat window. no plan bar, nothing. menu to select chats also disappears. (see Korg nutube integration chat) project is already shared with support.

I imported a new component and I want to remove the unnecessary silkscreen or text, but the delete key is not working even though it used to work before.

Created a new project. Chatted with the ai bot to create a li ion charger, click start.

Hello! I have an issue when using calculated diff pairs i have 2 problem when i make a minimum trace width rule the trace of the calculated dif pair sometimes are smaller for example if you try a 1mm min trace width the trace will be the same calculated (probably less than 1mm) the second and the most annoying problem is that the spacing does not change, if you check my current design which i attached the spacing does not change even if i add a minimum keepout rule.

Switch from PCB to Schematic leads to white Schematic Background This bug is guaranteed with my setup, it's just a matter of when . Switching from PCB layout editor to schematic editor leads to a white screen. I have had this happen on both Edge on Windows and Safari on Mac.

When trying to search a trace name, the results are not good. It shows other similar names. Example: Search for "Net 14". It will also show any objects containing the word "Net". I guess because of wild card searching on the Front-End.

https://www.flux.ai/zakiali66/reluctant-pink-jetpack ? asks to reload but errors out

I just created an account to test the system but it is stuck at the create project screen and it keep looping through the small initialization steps. I tested brave, chrome and edge and all do the same thing. is the system down?